Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Marietta, GA | Cardinal Air Duct Marietta
We’re Cardinal Air Duct Marietta, and we offer Air Duct Cleaning in Marietta for Trane systems every week. If you own a Trane system here, the one thing that sets our work apart is knowing how differently duct problems show up between east Marietta’s 1960s homes and the newer subdivisions west of I-75. We’re an independent service provider, not a Trane dealer or authorized rep, which means we answer to you, not a manufacturer’s playbook. Call (762) 216-4075 for a free estimate on Trane air duct cleaning anywhere in Marietta.
Why Marietta Residents Choose Us for Trane Service
Most duct cleaners can run a vacuum through your registers and call it done. Omar Haddad, owner of Cardinal Air Duct Marietta, built this crew around a different standard: we actually know what’s happening inside Trane systems in this city. Omar trained in heating and ventilation at Los Angeles Trade-Technical College, then spent years running Rotobrush and Nikro equipment before bringing that skill set to Cobb County. He’s worked dozens of Trane XR and XV systems in Marietta, including older craftsman homes near the Historic Marietta Square where original ductwork hides decades of debris.
Every job gets a written price before work starts, and the number doesn’t change at the door. That’s part of The Relay Standard: you get a live trackable arrival window, before-and-after photos of your ducts, and a digital invoice you can pay with a link. No guessing. No phone tag. We answer calls around the clock at (762) 216-4075.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Marietta
Here’s what our crews actually see when we pull registers and inspect Trane systems across Marietta service area homes:
- Undersized return drops on XR systems in 1980s split-levels. These older homes were built with tighter return ducting than modern Trane blowers need, so the system pulls air through every available gap, including attic fiberglass and that fine Georgia red clay dust. The result is a return side packed with debris and supply registers that never seem to stay clean.
- Sticky pollen film in Hyperion air handler condensate pans. Marietta’s spring oak bloom is relentless. Hyperion’s all-aluminum coils resist corrosion, but the condensate pan still collects pollen fines that harden into a sticky film downstream on flex ducts. Clean the ducts without addressing this and you’ll have the same problem again by late summer.
- Delaminating building paper in east Marietta return platforms. Trane systems in 1960s homes along the railroad corridor often sit atop return platforms framed with old building paper. Decades of Georgia humidity breaks that paper down, and it sheds directly into the return plenum. This isn’t something a standard filter catches.
- Collapsed flex duct in converted attic spaces. RunTru entry-level Trane units often use non-insulated flex runs that sweat hard during Marietta’s summer dew points. The inner liner eventually collapses, choking airflow to rooms far from the air handler. We repair or replace these connectors and seal them properly.
- Fiberboard supply ductwork crumbling in east-side homes. Original fiberboard ducts from the 1960s are reaching the end of their life all through east Marietta. A heavy-handed cleaning can tear the fiberboard faces. We use a gentler negative-air approach for these systems, which we’ll explain below.
Trane Service in Marietta: What Local Conditions Mean for Your Equipment
Here’s the information you won’t find on a generic Trane page: Marietta’s east-side neighborhoods, especially along the railroad tracks near the Square, are full of homes with original fiberboard supply ductwork that is actively disintegrating. This isn’t a gradual decline. Humidity from Marietta’s summers saturates the fiberboard, and the cycles of damp and dry slowly break the material down until it sheds particles into your living space every time the blower kicks on. Five miles west, in newer Cobb subdivisions where flex duct in the attic is standard, you rarely see this at all. But westside Trane owners have their own issue: those flex runs sweat, trap moisture, and sometimes collapse inward. Same brand, same city, two totally different failure patterns depending on which side of the Square you live on.
That’s why our first step is always a video inspection. We don’t guess which failure mode you have. We look. If your home is east of the Square with fiberboard trunks, we clean with reduced negative pressure to avoid tearing the faces. If you’re west of I-75 with attic flex, we check for moisture damage and collapsed liners before we start. And if your Trane is short-cycling on humid afternoons, we look for the return-side bottleneck that’s starving the blower.
One call off Whitlock Avenue near the Marietta Square sticks with us. We pulled the return grille on a Trane XR14 in a 1972 split-level and found the return pan coated in a half-inch of Georgia red clay dust that had been recirculating for years. Video inspection showed the original metal trunks were intact, so we negative-air cleaned every supply drop, sealed the return seams with mastic, and swapped the flex connectors that had separated at the boot. The homeowner told us the Trane stopped short-cycling within a week.
Trane Models & Products We Service in Marietta
Our crews work on every Trane line you’re likely to find in Marietta homes. Here’s the rundown:
- Trane XR series (XR13, XR14, XR15) – the workhorse heat pumps and ACs in 1980s – 2000s Marietta homes, often paired with undersized returns that trap dust.
- Trane XV series (XV18, XV20i) – higher-efficiency variable-speed systems, common in newer west Cobb construction, where attic flex runs are the weak point.
- Trane Hyperion air handlers (TAM7, TAM9) – durable all-aluminum coils, but the condensate pan collects pollen fines that migrate downstream.
- Trane RunTru line (A4 series) – entry-level units often found in converted attic and garage spaces, frequently with non-insulated flex that fails in Marietta humidity.
We focus on restoring your existing duct system rather than swapping parts you don’t need. When a duct component has failed, we use quality aftermarket flex duct, mastic, and diffusers matched to Trane duct sizing. We recommend replacement only when the original OEM duct board has crumbled beyond what sealing can fix. That’s the honest line we’ve drawn for over a decade.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Trane Air Duct Cleaning Cost in Marietta?
Most standard Trane air duct cleanings in Marietta run $300 – $550 for a typical single-system home, depending on the number of supply drops, the length of trunk lines, and the condition of the ductwork. Larger homes or systems with multiple air handlers can run higher, and older fiberboard systems that require the gentler approach may take more time. Duct sealing, flex repair, or video inspection add clear line items to the written estimate, never surprises.
Your written price is handed to you before a single duct is touched. You’ll know exactly what the job includes, what it costs, and how long it’ll take. Call (762) 216-4075 and we’ll walk you through a free estimate over the phone.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Marietta
Older Trane XR systems in east Marietta were often installed with undersized return drops, and when the return side can’t pull enough air, the system draws from wherever it can, including crawlspace gaps and wall cavities that carry fine Georgia clay dust. The filter catches some of it, but plenty circulates through the ducts and into your rooms. We fix the return path by cleaning the drops and sealing the joints so the only air going in comes through the grille.
In most cases, yes, if the fiberboard is still intact enough to hold together. We use a gentler negative-air approach for fiberboard, which removes debris without the aggressive agitation that tears the faces apart. We’ll know for sure after a video inspection. If the fiberboard has crumbled too far, we’ll tell you straight and quote a repair or replacement. Call (762) 216-4075 to schedule an inspection.
Marietta’s summer humidity pushes crawlspace air into your duct system, especially in older homes where return platforms have gaps or the duct joints were never sealed. That moisture mixes with pollen and dust, creating a sticky residue that clings to duct walls and can foster mold. We seal the return path and clean the supply runs, which reduces the moisture load inside the system.
Almost always, yes. The evaporator coil sits directly in the airflow path, and if the ducts are dirty, the coil is dirty too. A clean duct system hooked to a fouled coil will get dirty again fast. We clean the coil and drain pan as part of a full Trane system cleaning, no extra charge for the inspection.
Converted attic spaces in west Marietta often use non-insulated flex that sweats heavily during summer dew points. That condensation breaks down the inner liner over time, and eventually the flex collapses, cutting airflow to distant rooms. We replace the collapsed sections with properly insulated flex and seal the connections to stop the moisture cycle. Call (762) 216-4075 for a free estimate.
Service Areas Near Marietta
We run Trane duct cleaning routes through Trane sales & service territory across Cobb County and beyond. You’ll find us in Trane service in Milton for homes in the northern stretch, and over in Trane service in Acworth for the northwest side. We also work regularly in Chamblee, Lithia Springs, and Austell for Trane owners who want the same Cardinal standard.
Book Your Trane Service in Marietta Today
Dirty ducts don’t fix themselves, let’s just get it done right. Call Omar Haddad and the Cardinal Air Duct Marietta crew at (762) 216-4075 for a free estimate. We’ll set a trackable arrival window and hand you a written price before work begins.
Written by Omar Haddad, Owner at Cardinal Air Duct Marietta, serving Marietta since 2005.